Vortex Flowmeter
Thermal Mass Flow Meter
Compressor Online Monitoring System
Compressed Air Evaluation System
Accessories
|
|
|
TGF600 Thermal Mass Flow Meter |
TGF600 Series Thermal Mass Flowmeter is COMATE’s latest thermal mass technology with more rugged design to adapt to harsh industrial applications. It implements COMATE’s latest sensor filming technology and high sensitivity sensors to ensure a stable measurement at very low flow rate down to 0.3Nm/s. The standard insertion model can fit in pipe line from DN80~DN500, extended model can fit in smaller pipe down to DN25 and larger pipe up to DN 6000. The latest TPA600 circuit board and a dual-line LCD display provide user with most powerful and friendly operating interface. The TPA600 technology also ensures the product to give stable and accurate measurement and reliable output. |
|
|
| |
|
|
|
-
| |
| Features |
|
|
Insertion installing, can be installed/removed without stopping the line
Can be used on pipelines in difference shape
Minimum flow rate down to 0.3m/s, 1:100 super wide turndown ratio
No moving part, almost no pressure loss
Direct mass flow measurement, do not require temperature or pressure compensation
Isolated design for electrical parts to eliminate interference
Optimized power efficiency design, supper low power consumption down to 60mA@24VDC
Adapted to any power source
2 lines LCD display with unit displaying
Standard output is pulse and RS485, Hart@4~20mA and 4~20mA is available
Metric/British Unit selectable
Password protecting function and self-diagnose function |
| |
| TGF600 Series Thermal Mass Flowmeter measures the gas mass flow base on thermal diffusion theory. It combines COMATE’s advanced technology on transmitter, sensor, filming and calibration, can provide stable and accurate measurement even under harsh industrial applications and require very less maintaining. |
| |
 |
| |
TGF600 thermal mass flow meter has a no-moving part design, and can measure the mass flow directly. This feature means you can measure the mass flow meter with one single flowmeter, do not need to install any other device such as pressure sensor, secondary instrument etc, save a lot of cost and time. The meter also requires much less maintaining comparing with many other technologies as it has no part to be blocked. Thus it’s a very cost-effective ,reliable and durable measurement solution.
TGF600 provide 1.5%FS+0.5RD accuracy. The standard turn down ratio is 100:1. We also provide featured turn down ratio down to 10:1 to meet the high accuracy requirement in the range. |
| |
| Application: |
|
| |
Compressed air measurement
Pipe line leakage detecting
Gas drainage in coal mines
Measurement of other process gas: N2, CO2, O2, Ar, N2O
Emission monitoring
Measurement of biogas, aeration etc. |
| |
 |
 |
 |
 |
| Remote cable |
PDR80 Portable Date Logger |
3/4” Female NPT ball valve in 304SS |
3/4” NPT ball valve with flanges in 304SS |
 |
 |
|
|
| Hot tap mounting tool in Al alloy |
Hot tap hole opener |
|
|
-
|
Insertion type |
In-line type |
Media Compatibility |
Air, Nitrogen,O2,CO2,Argon,CH4, Natural gas, biogas, and almost all dry and clean air |
Pipe diameter |
DN25~6000mm |
DN15~300mm |
Flow velocity range |
0.3~30Nm/s or 0.6~60Nm/s or 0.9~90Nm/s or 1.2~120Nm/s |
Accuracy |
0.5% RD+ ±1.5% FS |
Temperature of medium |
－40~+150°c |
Pressure of medium |
1.6MPa |
4.0Mpa |
Power supply |
AC85～265V or DC13.5～42V |
Response time |
1 second |
Output |
Frequency + pulse + 4~20Ma as standard |
Communication |
RS~485 as standard , 4~20mA@HART as optional |
Date displayed |
Mass flow, Volume flow in normal condition
Total flow , Temperature of medium. Velocity |
Ingress protection grade |
IP65 (GB China) |
Pipe size (mm) |
Pipe size (inch) |
Option 1 (0.3~30 Nm/s) |
Standard (0.6~60 Nm/s) |
Option 2 (0.9~90 Nm/s) |
Option 3 (1.2~120 Nm/s) |
Min
(Nm3/hr) |
Max
(Nm3/hr) |
Min
(Nm3/hr) |
Max
(Nm3/hr) |
Min
(Nm3/hr) |
Max
(Nm3/hr) |
Min
(Nm3/hr) |
Max
(Nm3/hr) |
25 mm |
1“ |
0.53 |
53 |
1.05 |
105.9 |
1.58 |
158.8 |
2.11 |
211.8 |
32 mm |
1 1/4" |
0.87 |
86.7 |
1.73 |
173.5 |
2.6 |
260.3 |
3.47 |
347.1 |
40 mm |
1 1/2" |
1.36 |
135.6 |
2.71 |
271.1 |
4.06 |
406.7 |
5.42 |
542.3 |
50 mm |
2" |
2.12 |
211.9 |
4.23 |
423.7 |
6.35 |
635.5 |
8.47 |
847.4 |
65 mm |
2 1/2" |
3.58 |
358.1 |
7.1 |
716.1 |
10.7 |
1074.1 |
14.3 |
1432.2 |
80 mm |
3" |
5.42 |
542.3 |
10.8 |
1084.7 |
16.2 |
1627.1 |
21.6 |
2169.4 |
100 mm |
4" |
8.47 |
847.5 |
16.9 |
1694.9 |
25.4 |
2542.3 |
33.8 |
3389.8 |
125 mm |
5" |
13.2 |
1324.2 |
26.4 |
2648.3 |
39.7 |
3972.4 |
52.9 |
5296.6 |
150 mm |
6" |
19.1 |
1906.8 |
38.1 |
3813.5 |
57.2 |
5720.3 |
76.2 |
7627.1 |
200 mm |
8" |
33.9 |
3389.8 |
67.7 |
6779.6 |
101.6 |
10169.4 |
135.5 |
13559.3 |
250 mm |
10" |
53 |
5296.6 |
105.9 |
10593.2 |
158.8 |
15889.8 |
211.8 |
21186.4 |
300 mm |
12" |
76.3 |
7627.1 |
152.5 |
15254.2 |
228.8 |
22881.3 |
305 |
30508.4 |
| |
| Nm3/hr means the standard flow rate under 20 degree C, 0.1MPa condition |
| |
-
Model |
Basic Model |
TGF600- |
C |
2 |
T |
1 |
1 |
C |
B |
C |
8 |
1 |
|
Process Connection |
Flanged in-line |
F |
|
|
|
|
|
|
|
|
|
|
Insertion (NPT) |
C |
|
|
|
|
|
|
|
|
|
|
Insertion (NPT)（with anti-ejection design） |
D |
|
|
|
|
|
|
|
|
|
|
Inertion (with flange) |
G |
|
|
|
|
|
|
|
|
|
|
Probe Length |
290mm (DN25~DN150) |
1 |
|
|
|
|
|
|
|
|
|
440mm (DN25~DN500) |
2 |
|
|
|
|
|
|
|
|
|
Other |
Q |
|
|
|
|
|
|
|
|
|
Transmitte |
Integral |
T |
|
|
|
|
|
|
|
|
Remote |
R |
|
|
|
|
|
|
|
|
Material |
OCr18Ni9(304) |
1 |
|
|
|
|
|
|
|
316 |
2 |
|
|
|
|
|
|
|
Other |
Q |
|
|
|
|
|
|
|
Pressure Rating |
1.6 Mpa |
1 |
|
|
|
|
|
|
2.5 Mpa |
2 |
|
|
|
|
|
|
4 Mpa |
3 |
|
|
|
|
|
|
6.3 Mpa |
4 |
|
|
|
|
|
|
Flange Standard |
For Chemical industry |
A |
|
|
|
|
|
GB China |
B |
|
|
|
|
|
ANSI |
C |
|
|
|
|
|
Other |
Q |
|
|
|
|
|
Max Temperature |
Standard （T≤150℃) |
N |
|
|
|
|
Other |
Q |
|
|
|
|
Enclosure |
Comate blue enclosure |
C |
|
|
|
Transmitte |
pulse/frequency + 4~20mA@HART |
7 |
|
|
pulse/frequency + 4~20mA + RS485 |
8 |
|
|
Power supply |
13.5~42VDC |
1 |
|
85~265VAC 50/60Hz |
2 |
|
Pipe size |
please use 3 digit pipe size, such as DN50=050, DN300=300 |
XXX |
Remark: |
1. Ball valve, Hop-tap insertion tool and hot-tap hole opener are as accessoires, please remark if you need any of them |
2. Please indicate flow rate along with the model number selected |
3. If you have any requirement that can not be fulfilled in this document, please check with us to see the availability |
4. The model selected in 1st line is the standard configuration with no accessories |
|
